Market WatchSudan2026-03-126 min readSource：Platform summary, based on public gas field notices and equipment configuration notes

Sudan: using associated gas at central fields and refinery, choosing between skid liquefaction and CCHP

Gas use around central fields and refinery is shifting from flaring to on-site conversion, lifting processing and power demand near Khartoum; the choice starts from the gas curve and composition, not from unit size.

Key points

Associated and scattered well gas in Sudan is moving from flaring to on-site conversion, raising processing, liquefaction and power demand around central fields and refinery.
Skid liquefaction and CCHP are the two common combinations: the first turns gas into LNG that is easier to move and sell, the second supplies power and heat directly to drilling pads, processing stations and gathering facilities.
Before deciding, verify the gas curve, composition and site conditions, especially sulphur, water content and pressure swings; sizing for the lowest stable flow rather than the peak is the safer basis.

Associated and scattered well gas in Sudan is moving from flaring to on-site conversion, raising processing, liquefaction and power demand around central fields and refinery.

Skid liquefaction and CCHP are the two common combinations: the first turns gas into LNG that is easier to move and sell, the second supplies power and heat directly to drilling pads, processing stations and gathering facilities.

Before deciding, verify the gas curve, composition and site conditions, especially sulphur, water content and pressure swings; sizing for the lowest stable flow rather than the peak is the safer basis.

This note offers a configuration approach and promises no payback period or output; the actual scheme follows gas test reports and environmental and safety approvals in Sudan.

Need an equipment plan for this market?

Post your demand; we route it to local agents by destination country and match supplier quotes.