Market WatchCongo - Kinshasa2026-10-204 min readSource:USGS《Mineral Commodity Summaries 2026》

USGS 2026: DRC copper output around 3.2 Mt, cobalt about 70% of world supply

The USGS Mineral Commodity Summaries 2026 puts DRC 2025 copper output at about 3.2 million tonnes with reserves near 80 million tonnes, cobalt output at about 230,000 tonnes or roughly 73 percent of world supply; Zambia's copper output is about 940,000 tonnes with reserves near 21 million tonnes.

USGS 2026: DRC copper output around 3.2 Mt, cobalt about 70% of world supply

Key points

  • The USGS Mineral Commodity Summaries 2026 puts DRC copper mine output in 2025 at about 3.
  • For equipment, concentration means mine expansion and concentrator upgrades move on a similar timetable.
  • On the buying side, start from site conditions: road grade and haul distance set truck class, ore hardness and moisture set crusher configuration, and grid reliability decides whether diesel generation or storage is needed.

The USGS Mineral Commodity Summaries 2026 puts DRC copper mine output in 2025 at about 3.2 million tonnes with reserves near 80 million tonnes, and cobalt output at about 230,000 tonnes, roughly 73 percent of world supply. Zambia is listed at about 940,000 tonnes of copper with reserves near 21 million tonnes. Both figures point to supply concentrated in one narrow belt.

For equipment, concentration means mine expansion and concentrator upgrades move on a similar timetable. Open-pit stripping and haulage call for large haul trucks, electric shovels and rotary drills; concentrator work calls for crushing, grinding, flotation and tailings handling; hydrometallurgical projects add heap leach, solvent extraction and electrowinning. Cobalt is a by-product, so project economics follow the copper price and equipment spending tracks the copper cycle.

On the buying side, start from site conditions: road grade and haul distance set truck class, ore hardness and moisture set crusher configuration, and grid reliability decides whether diesel generation or storage is needed. Used units can add capacity during a transition, but check component vintage, structural deformation and parts availability first.

The figures are USGS annual estimates and may differ from final national statistics or company reports; refer to official releases and company announcements for definitive numbers.

Need an equipment plan for this market?

Post your demand; we route it to local agents by destination country and match supplier quotes.

Subscribe to country and sector news

Get updates by country and sector only, no unrelated mail.

Manage my subscriptions