Niger at 45 °C: frequent hydraulic overheat alarms, would an extra cooler help?
Yusuf B.
Miembro verificado · Distribuidor
At noon it hits 45 °C; two 22 t machines loading continuously alarm and derate at 95 °C oil temperature.
We cleaned the cooler, the fan belt is fine, and we use 46 grade anti-wear oil.
Add an auxiliary oil cooler or switch to 68 grade? Which is more reliable?
Discussion (3)
Chanda M.Miembro verificado · Ingeniero de servicio2026-10-17
Measure cooler inlet and outlet temperatures: under 8 °C difference means it is blocked inside, and washing the outside will not help.
Ahmed Ben SalahMiembro verificado · Ingeniero de servicio2026-10-18
Thicker oil does not fix the cause, and worn pump and motor clearances show up faster. Fix cooling before changing oil.
Paulo M.Miembro verificado · Ingeniero jefe de proyecto2026-10-19
An auxiliary cooler needs fan power and mounting room. Ours dropped oil temperature by 12 °C, but in dust it must be blown out weekly.
Respuestas recientes en este hilo, ordenadas por fecha de publicación
Unirse a la discusión
Inicia sesión para responder; el contenido aparece tras la revisión.
Iniciar sesión para responder