Kenya drip irrigation on 300 acres: is a 30 kW pump enough?
Grace W.
Проверенный участник · Управляющий фермой
Three hundred acres of drip irrigation in four blocks of 75, river source, 12 m fall.
Design flow of 3 m³/h per acre means 225 m³/h per block.
We are looking at a 30 kW pump at 35 m head, unsure both can be met.
Discussion (3)
Fatou D.Проверенный участник · Руководитель закупок2026-10-27
225 m³/h at 35 m is tight for 30 kW; check the operating point on the curve, not the plate.
Ahmed Ben SalahПроверенный участник · Сервисный инженер2026-10-28
Drip flow often runs below design; measure per block first, since an oversized pump raises energy and main cost.
Kwame A.Верифицированный участник · Менеджер горного оборудования2026-10-29
Size the pipe to the flow: 4-inch for 225 m³/h loses too much; 6-inch fits. This is the step most often skipped.
Недавние ответы в этой теме, отсортированные по времени публикации
Присоединиться к обсуждению
Войдите, чтобы ответить; контент появится после проверки.
Войдите, чтобы ответить