Kenya drip irrigation on 300 acres: is a 30 kW pump enough?
Grace W.
Verifiziertes Mitglied · Farmmanager
Three hundred acres of drip irrigation in four blocks of 75, river source, 12 m fall.
Design flow of 3 m³/h per acre means 225 m³/h per block.
We are looking at a 30 kW pump at 35 m head, unsure both can be met.
Discussion (3)
Fatou D.Verifiziertes Mitglied · Einkaufsleiter2026-10-27
225 m³/h at 35 m is tight for 30 kW; check the operating point on the curve, not the plate.
Ahmed Ben SalahVerifiziertes Mitglied · Servicetechniker2026-10-28
Drip flow often runs below design; measure per block first, since an oversized pump raises energy and main cost.
Kwame A.Verifiziertes Mitglied · Bergbau-Gerätemanager2026-10-29
Size the pipe to the flow: 4-inch for 225 m³/h loses too much; 6-inch fits. This is the step most often skipped.
Aktuelle Antworten in diesem Thread, sortiert nach Posting-Zeit
Diskussion beitreten
Melden Sie sich an, um zu antworten; Inhalte erscheinen nach Prüfung.
Zum Antworten anmelden