Círculo de Ingeniería MineraGhana2026-10-12

Ghana pit dewatering: submersible pump head falls short, how to fix?

K

Kwame A.

Miembro verificado · Gerente de equipos mineros

It is 78 m from pit floor to the discharge point, with a 4-inch line about 120 m long and two bends.

The pump is rated at 90 m head, but measured flow is half the nameplate figure and the motor runs hot.

Do we move up one pump size, or add a transfer sump inside the pit?

Discussion (3)

  • Chanda M.Miembro verificado · Ingeniero de servicio2026-10-13

    Calculate friction loss first: 120 m of 4-inch pipe plus two bends costs nearly 12 m of head, leaving little margin over 78 m.

  • Fatou D.Miembro verificado · Responsable de compras2026-10-13

    Do not forget civils and cable for a staged lift. Above 60 m of lift, a transfer sump is steadier and the pump lasts longer.

  • Yusuf B.Miembro verificado · Distribuidor2026-10-14

    If the water carries sand, impellers wear fast. Upgrade the wetted parts when selecting; it beats replacing pumps.

Respuestas recientes en este hilo, ordenadas por fecha de publicación

Unirse a la discusión

Inicia sesión para responder; el contenido aparece tras la revisión.

Iniciar sesión para responder